Home Stretch

As Nuit Blanche draws closer and closer (tomorrow!), the Aura team has been working hard to ensure a strong finish.  With all the final mock-up completed, we spent the week completing the panels.  All of the dowels were inserted and syringes filled with, an effort that could not be completed with the many volunteers that came to help.

Each of the panels were organized by two vertical wall-mounted sections and overhead, and then within each section the panels were connected by tubing filled with water attached to the syringes.  This proved to be the quite tedious as each panel had 64 syringes and we had to ensure that tubing was secured properly and connected to the right panel.  After a few days of hard work, we succeeded!  Currently we are attaching the last bit of fabric to the remaining panels and will then transfer them over to the site to be attached to the framing.  Stayed tuned for more photos and updates!

Each of the syringes were placed in a pool of water so that the dowels could be pulled to fill the syringes

The Aura team and volunteers ensuring that the syringes are filled correctly

A closer up of the dowels on the panels before fabric is attached.

Panels were arranged as they would be when connected to the framing so that right panels are connected to each other.

Various length of tubing was cut and filled with water depending on the distance between connecting dowels.

The tubing was then attached to each panel.

A view of a completed set of panels connected with tubing.  When the panels are illuminated light will also penetrate to the back of the panels and illuminate the syringes.

A view of our great volunteers who spent time helping us connect all those tubes!

A close-up view of the syringe connected to the back of a panel with fabric attached.

Almost there! A few more panels left to attach fabric to

View of a completed panel with fabric attached.

Close of outer fabric membrane with the some dowels extended.

Improving Assembly and Overhead Panel Construction

One of the many benefits to building a full scale mock-up is finding new ways to improve upon the installation for the final set-up on Sept 29th.  Previously, the Aura team completed one side of the ribbon, and while we were happy with how it came together, we felt it could use some improvement in the construction phase.  In construction the next phase of the ribbon, we used a hinge connection between the panels that greatly improved the time and ease of connecting nine panels at an angular layout.  It also resulted in a cleaner looking segment that achieved the result we intended when we first began designing and modelling the Aura installation.

A shot of our hinge connection.  This allowed us to easily secure the panels before mounting the conduit and also enabled us to determine the right angle that each panel would be placed at as each panel could be manipulated to achieve the right look.

The hinge connection also also cut down our construction time  as well as the number of people needed for setting up each panel, thus making the overall construction more efficient.  

The second section of our ribbon showing the angular layout of the panels.  

Our work over the weekend also involved completing the overhead phase of the ribbon, which proved to be quite challenging.  We wanted to ensure that the right transition would occur from the wall mounted panels to the overhead ones and allowed for us to determine the best way to assemble them on-site.  Each panel is first raised with rope and the lifted in place.  We then secure the panels with the braided steel cables and then the next panel is added sequentially.  Once the panels have been attached to each other and the frame we then began to adjust the angle and placement of each to ensure the correct form.  

As shown in our initial mock-up, each of the panels are suspended by braided steel cables fastened to an eye bolt. 

Undershot of the overhead panels with hinge connections. 

Fastening the hinge connections to the panels.

Lifting the third panel in place.

Determining how best to transition the overhead panels to the vertical (wall mounted) panels.

View of overhead panels from above.

View from end segment of ribbon.  This is just 1/2 of the overhead condition as a symmetrical segment would continue on the other side.  

Close up of the panels and their seams.

View from underneath panels looking towards the end of the segment

Panels lit up to make sure everything is properly connected and to demonstrate the overhead illumination.  

The Aura team documenting their work.

View of panels from below.

Fil (6'-3) demonstrating how high the panels are suspended (7'-0" at its highest)

Stay tuned this week for more updates as it is sure to be busy with Nuit Blanche fast approaching!

Lighting Trials

As the [R]ed[U]x Lab team puts the finishing touches on their Stop Night Market Cart design, they have been busy exploring the possibilities of lighting and powering the cart for the evening's festivities. Unfortunately power is something hard to come by in the Honest Ed's alleyway so the team has been experimenting with LED's, circuitry, and automotive batteries to keep the cart illuminated for the entire night.  Once again the staff and resources at the Department of Architectural Science assisted the team in sorting and sourcing out lighting support including multicoloured LED strip lighting.  Note the varying tones that can be set for the cart depending on the wiring configuration.