A lot of the day was spent getting the 30 panels started. Each panel is constructed of a series of MDF, acrylic and plywood planes held together through the use of perimeter skirts and spacers for support. Syringes are mounted in a backer panel comprised of
a plywood sheet routed to accommodate the syringes which are held
in place by an MDF plane allowing plungers to move in and out of the
barrels. The plungers are attached to a dowel which is in turn fastened
to a circular MDF cap which acts as a pushing surface. The frontal plane
of the panel is comprised of an acrylic sheet fastened to the back of a
final MDF plane which lies behind the outer membrane. So far the Aura team built and assembled the perimeter skirt for each panel, as well as attached the spacers and the frontal plane of the panel.
 |
| Gluing the Perimeter Skirts Together. |
 |
| Frontal Plane of Panel |
 |
| 16 More to Go! |
 |
| Key to Efficient Production - The Assembly Line |
 |
| Acrylic Layer of Frontal Plane |
 |
| Adding the spacers |
 |
| Horizontal Frames of Structure |
 |
| Attaching Spacers to Vertical Frames |
 |
| Horizontal and Vertical Frames For the Supporting Structure |
 |
| Always Clean Up! |
 |
| Coming Soon! |
